Kufatec
»
Audi
»
Q7
»
Q7 - 4M
» Surrounding camera - 4 Camera System for Audi Q7 4M Equipment 2: Parklenkassist vorhanden, Model year: from model year 2021
Assistance system "surrounding camera" - surrounding view to the entire representation of the vehicle environment for Audi Q7 4M
4 cams (radiator grill, side mirrors, tailgate) provide a complete picture of his surroundings
Optimal docking of trailers
Detection of low barriers by driving off-road
Function of Parkpilot*: (only available from year 2020)
Fully automatic autonomous parking (for safety reasons the button in the centre console must be pressed and held down)
Activation parkpilot in the mmi and use the sensors to scan a suitable parking space while driving (Max 40 km/h)
Press and hold the button in the center console, the vehicle takes over the parking process completely (incl. Gas and brake)
graphical representation of the route by the cameras
releasing the button causes the parking process to stop immediately
Selectable option:
Until model year 2019;All Equipment (PR No .: 7X2 or 7X5)
Model year 2020;front and rear parking aid available (PR No .: 7X2)
Model year 2020;parking assistant available (PR No .: 7X5)
From model year 2021;front and rear parking aid available (PR No .: 7X2)
from model year 2021;parking assistant available (PR No .: 7X5 or 9X9)
Scope of delivery:
cable set
Control unit
4 x camera
various brackets
center console button
codier dongle
Note:
Only in combination with Audi Virtual Cockpit (PR-No.: 9S8,9S9) and parking system plus (PR-No.: 7X2 or 7X5)
For vehicles from year 2020 with zFAS version A (read out via diagnostics) article 44547 is additionally required
If required, commissioning is carried out via remote support
* For vehicles from year 2020 automatic parking is not possible without ACC (PR-Nr.: 8T6)
For vehicles without factory park distance control this must be retrofitted
If the vehicle already has a rear view camera ex factory, this must be exchanged for the rear view camera included in the scope of delivery
Additional notices:
The hardware can partly come from test vehicles and went through a comprehensive functional test. The software is up to date
If you are unable to complete the commissioning yourself, or if it is an SFD2 vehicle (More information can be found here) for which commissioning is mandatory, we offer an optional one-time remote commissioning service, which can be added via the shopping cart button. This is a one-time service; if coding is lost, for example, due to a software update or other interventions, the commissioning fees will be due again. If no remote diagnostic interface or coding dongle is listed in the scope of delivery of the item, any KUFATEC dongle or our KURDIS KUFATEC remote diagnostic interface article number 70000 is required for commissioning
EUR
GBP
