Product information "A2DP Bluetooth Receiver 3.5 mm jack, USB Ampire BTR300"
Universal Bluetooth receiver for vehicles that have a 3.5 mm jack and USB socket as an AUX input
Just plug in both plugs for installation - Plug & Play
Power is supplied via USB and music is played via the jack cable
The Bluetooth receiver can be installed out of sight because it has no controls or buttons that need to be operated
All settings, such as volume, music selection and play / pause, are made on your device (e.g. mobile phone)
Details:
splash-proof, marine certified
automatic activation
QDL licensed Bluetooth 4.0 CRS I9chip
A2DP in the highest EDR specification - BT audio streaming also uncompressed files such as Wave, Flac, Lossless, MP3 etc.
3.5 mm jack plug with 1.0 V signal output
SSID display name: BTR300
Connections:
USB input (5 VDC power supply)
3.5 mm jack plug output
Technical specifications:
Voltage: 5 volts DC
Current consumption: 40 mA max.
Bluetooth 4.0
Frequency range: 20 Hz-20 kHz
Output voltage: 1 V RMS
Cable length: 300 mm
Scope of delivery:
Bluetooth receiver
Note:
Several devices can be connected to the BTR300, but only one device can stream music at a time
The BTR300 always remembers the device last learned and connects automatically after being switched on
A connection to another device must be made manually
If the connected device is out of range for more than a minute, the connection is automatically interrupted and the BTR300 goes into pairing mode [the LED (6) flashes]
BLUETOOTH APPROVAL - Declaration ID D025151 Referenced Qualified Design ID 56386 - Listing Date 08 December 2014
If your vehicle does not have a USB interface, you can use our USB charging adapter for the cigarette lighter, Article No. 38097