IMA, Integrated Multimedia Adapter, allows you to connect and control up to 2 multimedia devices through the following Sat/Nav systems:
Volkswagen MFD
Volkswagen MFD-2/RNS-2
Volkswagen RNS-510
Skoda Nexus 4:3
Skoda Nexus 16:9
Skoda Columbus
Seat Navigation 4:3
Seat Navigation 16:9
Audi RNS-E
Audi RNS-D
Lamborghini Gallardo (RNS-E)
Ford MFD 4:3
Mercedes Command 2.0
Mercedes Command 2.5
Easy installation due to automatic head unit detection
Reverse view camera integration (NTSC)
The following options can be configured through the head unit:
Contrast
Saturation
Color
Picture Orientation
Menu driven configuration for single/double device control through FIS *
The following devices can be connected to the IMA:
DVD Player MP 410U**
DVD Player AIV Car DVD Player**
DVD Changer 6-fach DVC62**/ ****
DVD Player DVD145**
DVB-T Receiver Ampire100SL**
DVB-T Receiver Ampire DVBT200/ 400
DVD Player Directed Video DV 2602**
DVD Player MP 412U
DVB-T Revceiver Dietz 1491
DVB-T Receiver Eastern SE863-T
DVD Player Yamakawa MP28****
DVD Player Xoro****
DVB-T Receiver 200T****
DVD Player BOSS 2500****
DVD Player BOSS BV2600UA****
HDD Rapsody RSH 100
HDD Rapsody RSH 300
DVD Player CKO MP83 SE****
DVB-T Receiver Alpine TUE T150DV / TUE 200
DVB-T Receiver Alpine TUE-252 TX**
DVB-T Receiver CKO 1080
IMA Video Switch
DVD Changer 10-fach DVC10****
DVB-T Receiver Hirschmann CAR TV 2.0
DVB-T Receiver Bullit DVB-T
DVB-T Receiver D80
DVD Player Zemex MP 20U**
USB Player Zemex**
USB Video Interface Alpine KCE 635UB
DVB-T Ampire DVBT52
DVB-T Bullit HD 4G
DVB-T ASUKA ARA-HD
DVB-T Ampire 55-HD
No OEM TV-Tuner required
Features - Interface:
Automatic signal detection (PAL / NTSC)
TV Tuner Emulation
2 Video Inputs (FBAS / Composite)
A selected list of functions for the multimedia devices (DVD-Player, DVB-T, HDD, etc.) can be controlled through the head unit, so the IR remote control is no longer required
Scope of delivery:
IMA Interface
Notes:
The following components are required for the IMA integration:
A vehicle specific loom to connect the IMA to your Sat/Nav system
Control Line - device specific(!) -
Splitter to control 2 devices
* Configration will be displayed through the FIS-Display - not all cars are equipped with FIS.
** Only marked devices can be used for 2 device control. The marked device will be the primary device.
*** Automatic rear camera switching occurs at RNS-E Part No: xxx xxx xxx x 192 (A3 8P, A4 8E, TT 8J) VW MFD2, RNS2. The prerequisite for this is that the information is transmitted via CAN bus.
Only suitable for an NTSC camera
**** These devices are not controllable by the RNS-510 head unit
The selected devices to control must be supported by the IMA interface.
If your device is not listed, feel free to contact us. We'll integrate it into the IMA.
Not suitable for "Non-DX" Audi head units RNS-D (Version E)
For retrofitting into VW vehicles with factory fitted rear view camera "Low" (e.g. Golf 6, Scirocco) item number 37611 will be needed in addition.
EUR
GBP
